Double Cone Rotating Vacuum Dryer
|FOB Price:||US $20,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $20,000/ Set|
|Production Capacity:||200 Sets/Year|
|Payment Terms:||L/C, T/T, D/P|
- Model NO.: SZG
- Flow: Cross Flow
- Material Status: Powder, Solution, Cream, Strap, Bulk
- Operational Method: Continuous
- Appearance of Dried Sample: Bulk
- Structure: Rotary Type Drier
- Material: Stainless Steel
- Design and Fabrication Stds.: GB, En
- Trademark: ChangAo
- Specification: FCL
- HS Code: 8419399090
- Movement Way: Combined
- Heating Mode: Transmission
- Drying Medium: Superheated Steam, Air, Hot Water
- Type: Double Cone Rotating
- Type of Flow: Cross Flow
- Operation Pressure: Vacuum
- Condition: New
- Certification: Ce, ISO, GMP
- Transport Package: Wooden Box
- Origin: Changzhou, China
SZG double cone rotating vacuum drier is double cone rotating cylinder. Under the state of vacuum inside the cylinder, pass steam or hot water into to jacket for heating. The heat can contact with the damp raw material through the inner wall. The vaporized steam will be pumped out through vacuum exhaust pipe when the damp raw material absorbed heat. In view of the internal cylinder is in the state of vacuum and the raw material is turned over all the time caused by the rotating of cylinder, the dry speed of raw material is quickened and drying efficiency is raised too and the purpose of uniform dry can be achieved.
1. During heating, use automatic constant temperature control. It can be made the biochemical products and mineral raw materials dry. Its temperature of operation can be adjusted from 20~90º C.
2. Compared with ordinary drying oven, its heat efficiency will be more than 2 times;
3. The heat is indirect. So the raw material will not be polluted. It is in conformity with the requirement of GMP. It is easy for cleaning and maintenance.
|Material feed factor||0.6|
|Working volume (L)||50||100||175||250||375||500||750||1000||1500||2000||2500|
|Design pressure inside the cylinder||-0.09-0.096|
|Design pressure of jacket||0.36|
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment. Aokai is located in Benniu Town Xinbei District of Changzhou City, close to Beijing-Shanghai Railway, Shanghai-Nanjing Expressway and Changzhou Airport.
The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.
The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.
For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.
With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.
Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.
1. Q: Please describe your warranty period.
A: 15 months after the equipment is arrived at the destination port or 12 months after the installation and commissioning of the equipment, whichever comes first.
2. Q: Do you provide on-site installation and commissioning?
A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.
3. Q: How about the cost of on-site installation and commissioning guidance?
A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.
4. Q: Are you a factory or a trading company?
A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing.